Arduino Pro Micro Eagle Library Page

Once you have downloaded the .lbr file, follow these steps to add it to your Eagle workspace: Eagle Library for Arduino Pro Micro - General Electronics

| Symbol Pin | Package Pad | Signal | |------------|-------------|--------| | RAW | 1 | RAW | | GND1 | 2 | GND | | RST1 | 3 | RST | | VCC | 4 | VCC | | TX | 5 | TX | | RX | 6 | RX | | GND2 | 7 | GND | | SCL | 8 | SCL | | SDA | 9 | SDA | | A3 | 10 | A3 | | A2 | 11 | A2 | | A1 | 12 | A1 | | A0 | 13 | A0 | | D15 | 14 | D15 | | D14 | 15 | D14 | | D16 | 16 | D16 | | D10 | 17 | D10 | | D9 | 18 | D9 | | D8 | 19 | D8 | | D7 | 20 | D7 | | D6 | 21 | D6 | | D5 | 22 | D5 | | D4 | 23 | D4 | | LED | 24 | LED | | D12 | 25 | D12 | | GND3 | 26 | GND | arduino pro micro eagle library

The Micro-USB connector adds roughly 0.07" to the board's total length. Once you have downloaded the

The most reliable source for a Pro Micro footprint is the . Because SparkFun designed the original Pro Micro, their library contains the most accurate footprints and symbols for both the 5V and 3.3V versions. arduino pro micro eagle library