A dialog box appears: "Turn the transceiver power OFF, then ON while pressing and holding the [PTT] and [Side Key 2] (below PTT)."
You plug in the cable. Its USB end goes into your PC. Its 3.5mm TRS (Tip-Ring-Sleeve) plug goes into the radio’s [SP] jack, and the smaller 2.5mm plug goes into the [MIC] jack. Windows chimes. Device Manager shows "Silicon Labs CP210x USB to UART Bridge (COM5)." Good. icom cs-f3000 programming software
Efficient configuration and management for your Icom F3000 series radio fleet. A dialog box appears: "Turn the transceiver power
To get started, you can’t just rely on the software alone. You need a complete "programming kit": A licensed copy of the CS-F3000. icom cs-f3000 programming software